Serial Data Transport Interface

A way of transmitting data packets over a Serial Digital Interface datastream.

Serial Data Transport Interface is a way of transmitting data packets over a Serial Digital Interface datastream. This means that standard SDI infrastructure can be used.

Developed to address the needs of the growing number of compressed video standards (DV, DVCPRO, BetaSX, MPEG2) it allows the lossless transfer of data to other devices that have the same codec, for example, DV to DV or SX to SX.

Using a standard SDI transport, the extra data is placed within the normal active video, between Start of Active Video (SAV), and End of Active Video (EAV). This gives 1440 10bit words of data at 270Mbit/s (1920 words in the 8bit 360Mbit/s standard).

If an SDTI stream is viewed using a standard SDI device, then the raw data can be seen as a small strip along the left-hand side (usually in purple). The DVCAM SDTI has video data at the top, control data in the middle (Timecode, etc.) and audio at the bottom just like it is organized on the tape.

Because SDTI is used for compressed data the area used is less than a full screen; this allows for faster than real-time transfers.

SDTI is standardized as SMPTE 305M. A 1.5 GBit/s version, using the high definition serial digital interface, is standardized as SMPTE 348M.

Key Terms

data packets
serial data transport interface
serial digital interface datastream
standard sdi infrastructure

Additional Resources

No ressources found.




Serial Data Transport Interface
(none found)


No comment found.

Sources & Credits

Last modified on March 23 2020
Content adapted from Wikipedia
No credits found. is service provided by Codecide, a company located in Chicago, IL USA.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram
Malcare WordPress Security